Rope Cutter Portable Continuous Use 100w Hot Knife Sailing Cloth Commercial Use

'X'Sports
2588
New 100w Version
    Delivery time:<3.30pm Next Work Day
Add to cart
  • Description
Cuts Synthetic Rope Cords, Sail Cloth, Webbing

Leisure Pursuits are so proud of the success of this brand new 100w continuous use product that we now provide a full 2 year unconditionally UK warranty for this product. Beware non UK sellers. If it develops a fault within that timeframe we will fix it or replace it FOC. This product is fully European Standards Certificated (Copies available).

 

This ‘X’Sports exclusive new model provides up to 100w of continuous heat for all production environments. This hot knife cutter will cut and seal the edges of most synthetic materials with ease and very little effort. It heats up to 500 degrees C in just 6-8 seconds. The 'R' blade supplied is suitable for cutting and sealing rope up to 17mm in diameter. This blade gives a clean neat cut that also prevents rope/braid from fraying.

Uses include webbing, belting fabric, elastic, cord, ropes, sail cloth, awnings, nylon and synthetic fabrics. A quality product that’s boasts a spring loaded safety trigger ON/OFF switch, Double overheat protection for thermostat, purpose made heavy duty storage box.

 

  • Fitted with hanging hook and 3m of power cord
  • Supplied with ‘R’ blade: W32 x D5mm - Ropes, Fabrics, Sail Cloth.
  • Blades operating temperature = 500°C
  • Operates continuously when trigger is held down
  • Storage box dimensions: 29cm x 19cm x 9cm
  • Voltage: 220v-240v.
  • Wattage: 90w of Rated Power, 100w of Continuous Power
  • Brass wire brush and spanner included
  • Product Weight only: 1.005kg
  • Certificated Conformity EN 60335-1:2012, EN 60335-2-45/A2:2012, EN 62233:2008.
  • Certificated Compliance EN 55014-1/A2:2011, EN 55014-2/A2:2011, EN 61000-3-2/A2:2009, EN61000-3-3:2013.
  • Fitted with a UK 3 pin mains plug to BS1363

To further enhance this excellent product, we can also offer the following optional accessories (Please use the relevant links below to add to your order)

  1. Cutting Foot - A specially designed cutting foot that eliminates the need for a destructive cutting surface when using a hot knife. You can cut canvas right on your hardwood floors or webbing out on your boat without leaving black gouges and cut marks from the red-hot cutting blade. This cutting foot also holds the material down whilst cutting to minimize edge curling and provide a high quality cut and seal. Buy - Cutting Foot
  2. Hot Knife 'R' Blade - Suitable for cutting and sealing rope up to 17mm in diameter. This cutter blade gives a clean neat cut that also prevents rope/braid from fraying. Buy - 'R Blade
  3. Hot Knife 'F' Blade - Will cut webbing precisely and automatically seal in one motion. Cutting area width maximum 45mm. Buy 'F' Blade
  4. Hot Knife 'VR' Blade - Cutting blade that allows for top and bottom heating which is excellent for cutting and sealing of thicker fabrics of awnings, sails, netting and webbing. Buy 'VR' Blade
!